3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
The prints are shinier so I guess there's a better heat flow in the hot end, especially at higher speeds.
But my goal was mostly to replace the stock hotend with a well known and well regarded design.
The stock one has a flaw with PETG, I'm not sure if it's the material or the temperatures but it makes the nozzle creep down. Very slowly at first, leading to bad looking or failed prints and horrible first layers and constant z-offset fiddling, until it suddenly and very forcefully and catastrophically drives itself through the build plate or the print.