QuazarOmega

I was trying to read up on it and just based off of the manual it seems not to make sense if I'm not using --silent alongside it, but I found this one article stating otherwise: https://nrogap.medium.com/show-error-response-for-curl-64666cd64330

I can't figure out if it's just AI slop or badly researched since it doesn't even show a real URL to test the commands against.

       -S, --show-error
              When used with  -s,  --silent,  it
              makes  curl  show an error message
              if it fails.

              This option is global and does not
              need  to be specified for each use
              of -:, --next.

              Providing -S, --show-error  multi‐
              ple  times  has  no  extra effect.
              Disable it again  with  --no-show-
              error.

              Example:
               curl --show-error --silent https://
example.com

              See also --no-progress-meter.

I'm trying to activate the experimental desktop mode feature under

Settings > System > Developer options > Window management > Enable desktop mode

Even after rebooting as it says to do, whenever I connect an external monitor via HDMI or DisplayPort, the phone's screen is simply mirrored, no desktop mode.

I just started using the Summit app for a day and realised now I involuntarily downvoted quite a few comments conviced I was upvoting them, fooled by the color of the swipe action (I didn't look at the arrow showing up until now) and wanted to remediate even if it's pretty inconsequential.
Another option if ths one isn't really possible, how to browse my read posts, at least I'd be able to find the discussions I had read through

Cody, one of the first few decently good AI assistants that were well integrated into VSCode bit the dust just recently as the greedier and greedier Sourcegraph direction decided to switch to the completely Enterprise (read proprietary) "solution" Amp.

With this commit, another notable project by them goes down, first was their signature code search engine, now this, I just feel sorry for everybody who contributed and now will see pretty much all their efforts rendered meaningless, it was already apparent by how Sourcegraph approached Search sunsetting how much they care about open source, but I'd say this seals the deal even better if you needed insight into whether to trust them or not.

I think what's left by them that might be useful still is the zoekt library and a few other minor repos they have, but they're nothing compared to the impact of the other two.

Things like these make me question how we can just buy in to projects using non-copyleft licences, it's a time bomb, especially with corporate driven software and I see many developers fall into that trap, that in an endeavour for perceived simplicity, will choose Apache, MIT, Unlicense (pls not this one 🥲), or what have you and not care.
What people see as pragmatic in open source is really just a conclusion that comes from the point of view of the maker, rather than the community

Hello! I wanted to make some order in my screenshots, it would be extremely helpful if I could define defaults based on the app that is currently focused when taking the screenshot, if that's at all possible given Wayland's restrictions.
Do you know if there's a way, I haven't found any setting like that in Spectacle, but maybe there's some kind of workaround?

Edit: to add to @DmMacniel@feddit.org's solution, a few tweaks to make it a little easier to handle:

1. If you want the actual screenshots to be placed elsewhere, you can create a symbolic link to that path with the name of the directory that is generated when you save the screenshot, e.g. I use it for a game, I tried to save a screenshot of it and it created a directory named "Genshin Impact", so I replaced that with a symlink to where I want it to be ("Pictures/Games/Genshin Impact/Screenshots")
2. Since the title is only added when you take an "Active Window" screenshot, you can trigger it with Meta+Print Screen and as a bonus the screenshot is automatically saved with this shortcut, without needing to change other settings

I have a Pixel 8a, which is certified qi1, and 2 devices that can wirelessly charge it, a baseus battery pack and an ESR phone holder, they're both certified qi2 (which is backwards compatible with qi1), yet when I charge with them I can at most reach ~2.2W charging instead of the 7.5W advertised maximum for my Pixel 8a.
I don't understand why that is and if I can even theoretically reach the maximum supported charging power.
If so, how would I test my devices to figure out what their real thresholds are or if there are incompatibilities somewhere?

If an app that I have is marked for Automatic Removal due to deprecation I can't keep the app and update the rest, because if I try to click Cancel the whole update process stops, if I click Proceed the app will be uninstalled and then the rest gets updated.
Why does it work like this, am I just not supposed to keep deprecated apps for security concerns? I hope it's not intended, because this just hampers the user unendingly.
This time it's Metadata cleaner that is going, but it could be any app that someone relies on, they'd be forced to go to the command line to update the rest while keeping that one app?

The Medito app is a (unsurprisingly) meditation/mindfulness app. Sort of the free software alternative to Headspace.
I haven't used it in a long time and was curious to see how it was doing, but I saw this:

• it's only available on IzzyOnDroid now, I believe it used to be on F-droid at some point (edit: it wasn't)
• the available release is 2 years old

So I thought, maybe the app was sadly just archived, but no, it's actually still under development, it's just that no releases have been published on GitHub for 2 years (2.0.48 clearly titled "Deprecated"), instead the Play Store releases keep being pushed out as recently as 3 February 2025 (3.2.0).
Oh and the issues tab has been disabled, which seems very shady to me.
So I wonder what the heck went down with this excellent app, it may still be considered "free software", also featuring the best licence (AGPL), but it looks like it has become unfriendly towards the community, I wonder why

I'm on a Fedora Kinoite system that is entirely on one LUKS encrypted drive, I recently added a second drive to have more space and I'm wondering how I should make use of it.
For now I formatted it completely with a new btrfs partition encrypted with LUKS and to actually add I thought I could:

1. automount it to some location, not sure where I should mount it though, I've seen many questions online that say to avoid /mnt for permanent drives and also /media (there are contrasting opinions on that, though), so I thought I could maybe sidestep this question by going with the second option which is the following
2. extending the already existing btrfs /sysroot to span across the 2 partitions on the separate drives, but I didn't find good information on this process when LUKS is involved. It seems like that kind of operation is heavily discouraged due to risking data loss

So I wonder, what is the best approach and the one that will give me fewer headaches? If it is the second, how do I do it?

Edit: going with the first option I had an issue where the drive wouldn't be mounted automatically at boot, I then read through my /etc/crypttab more carefully and saw that the UUID was wrong, I had used the partition UUID (PARTUUID as seen with the blkid command) instead of the actual device UUID, after correcting that it works and mounts correctly. Just a small oversight, the hardest to notice sometimes.
References:

• https://docs.bazzite.gg/Advanced/KDE_Partition_Manager_Auto_Mount_Guide/
• https://blog.lambda.cx/posts/adding-a-second-encrypted-drive-to-fedora/

I wanted to install a few PWAs in my private space but the option for installation or shortcut creation isn't there on the same websites where it appears in the normal installation of the browser app.
Is this a limitation strictly related to the private space?

What is this?

For all you Reddit refugees this is like r/place.
For all who don't know what that is either, this is a public, well, canvas, that will be freely accessible to anyone with a Fediverse account (specifics on the main post, don't worry, Lemmy is included).
You'll be able to place (this is not place!!!) one pixel every certain amount of time on the canvas, either in an empty or an already used spot, overwriting it in the latter case.

Where is this happening?

Right over on https://canvas.fediverse.events/

Announcement post and other related stuff:

• Main post: https://toast.ooo/post/3740832
• Community: !canvas@toast.ooo

When can we participate?

On the 12th July 2024, or 2024-07-12 for all you ISO lovers!

Why should I care?

I don't know, it could be fun and it's not like you have to do it alone, it's actually way more fun to partecipate alongside your fellow fediversers, sooo... monke together strong?
If you have some particular interest and you want it represented, try to look for your people in the right communities, and organize together to make the best fricking piece of pixel art the world has ever seen!!

From here I guess we can invite you to maybe make a little something for our lemy.lol instance's community, claiming a patch of land for ourselves as the (certified) best instance of the Fediverse (full disclosure: am admin of said instance).
If we want to make something, we can probably make a Matrix room to coordinate our efforts!
Otherwise, just go ahead and have fun with your loved <insert niche game/anime/film/any piece of media> and make something out of it!

Lastly here's last year's final canvas to try to win you over (or scare you):

I've been looking around to find a good keyboard for myself after having used a sad wireless membrane, so, after reading around a bit, as my first foray I decided I wanted a 75% with mechanical brown switches, but I'm finding it really hard to find a good list of keyboards that matches my description because I'd like the layout to be Italian and most, if not all of the ones I found are US instead, I'm not a touch typer so I still care about that.

So is there any comprehensive website that allows you to filter by all the relevant characteristics?