3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
It's powered by USB battery bank and a USB-PD breakout module that tells the battery bank to output 12V. I put them inside a zip-lock bag inside the 3D printed box. It's water proof enough for the sonoran desert.
FreeCAD! 🙌
What's different about normal bike lights and ebike lights? I think here they are basically the same.
ebike lights have wires to connect to an external source of power. The vast majority of regular bike lights have integrated batteries. (Excluding dynamo powered ones of course)
Yep, it's basically the SEO term I use to find "bike lights without a battery"
Where is the advantage in that outside of an actual ebike with battery?
Having a single battery and integrated running lights that are always present is convenient compared to having discrete lights on the frame that need seperate charging/replacement and need to be brought with you and stowed when not in use. At least that's been my experience. Less to charge, less to remember to bring.
Is it cheaper? Or brighter?
Very nice, thank you for going above and beyond with all the pictures and images of the CAD. I don't recognize the brand of the bike, what is it?
It's a mongoose Envoy. I'm glad you liked the pictures!
So you added lights to your bike. Got it lol
That's wild, I just did the same with the same exact lights.
Nice! Looks good.
Nicely done! I do something like this on my bike too, except it's just strips of neopixel RGB LEDs on the frame held in place with zip ties driven by a pi pico. As a result I can program different light modes (flash, solid, fade, rainbow party mode, fake police lights etc etc etc) and even turn signals.
Having a single battery means less to charge/replace. It all runs off a USB battery bank and lasts days. My lights also cannot be removed or stolen easily and even if you do what's the point it's just a strip of LEDs, it's all easily replaced even if they do. Having integrated bike lights seems more convenient for me and I don't have to worry about forgetting my lights when I go out after dark.