Just got done rough fitting the rails the bolt ride on for a 2077 build after getting an intact barrel cetme kit. I'd previously bought a cetme kit with no barrel, had it mostly fitted to the rails but couldn't go any further cause I didn't have a good enough drill press to handle the barrel pin notch so I stopped there. The old kit also had too much material removed in the mag well cut but this second kit fits the recess in the printed receiver as if made for each other. Now just to order the weldless strut items and I think I should be able to finish up with what I already have. It's already lined up well enough it can cycle into battery with no receiver pins if you don't flex it.
