Woodworking

9101 readers

6 users here now

A handmade home for woodworkers and admirers of woodworkers. Our community icon is submitted by @inquanto@lemmy.world, winner of the Christmas 2025 gift contest with a lovely series of hardwood cutting boards.

founded 3 years ago

MODERATORS

NataliePortland@lemmy.ca

captain_aggravated@sh.itjust.works

Rose for a Vihuela de Mano (Renaissance Guitar). Cherry/ Ebony/ Parchment. ⌀87mm (feddit.org)

submitted 2 months ago* (last edited 2 months ago) by alleycat@feddit.org to c/woodworking@lemmy.ca

15 comments fedilink hide all child comments

I constructed everything in Fusion360 and cut the wood layers on a CNC. The parchment layer was cut with a foil cutting machine. Here are the individual layers:

you are viewing a single comment's thread
view the rest of the comments

[–] luftruessel@feddit.org 0 points 2 months ago (1 children)

What CNC are you using? And how large (small) were the bits?

[–] alleycat@feddit.org 0 points 2 months ago* (last edited 2 months ago) (1 children)

The mechanical parts are a CompactLine 8050 from Sorotec (German manufacturer), Spinogy X22 spindle, and the electronics are custom.

For cutting the rose pattern I used a 15° "RazorPoint" V-carving bit, which worked remarkably well. I have basically zero-radius corners at the bottom.

[–] luftruessel@feddit.org 0 points 2 months ago* (last edited 2 months ago)

So not quite the cheap stuff I guess 😂 Had also looked at this one and I'm afraid one day I'll end up with one as well