I think most people just didn't understand your anti-AI message and downvoted simply because you have "AI" in your title.
Ich rege mich über sowas schon gar nicht mehr auf. Die meisten Demokratien haben sich für kollektiven Suizid entschieden, und der Rest der Menschheit hat keine Wahl. Auf demokratischen Wege sehe ich in relevanten Zeiträumen auch keine Möglichkeit, etwas zu ändern. Die Lösung kann nur noch technologisch und/oder wirtschaftlich sein. D.h. dass regenerative Energien und Elektrifizierung sich auch ohne Zutun der Regierung sich schnell genug durchsetzen, wofür ich durchaus Hoffnung habe.
Someone didn't like their art critics...
It's not enough that you touch grass with your hands. You must go to a green meadow, strip naked and lie down, face first. Let the grass touch every inch of your skin.
For France, this is correct. But in Hungary and Romania the problem was not that the river water was too warm, it was that it had disappeared entirely. The water levels are too low to properly cool the reactors.
It dampens the sound a bit, makes the instrument sound less bright. Renaissance & Baroque guitars are much brighter in tone than modern guitars, so without a rose, these might sound too harsh.
I tested a 3d-printed rose insert for my classical guitar and it just sounded... well, not unpleasant, but muffled, like hearing it from a distance, or from the next room. Modern guitars naturally sound more mellow, so this was too much. Sounded decent with a capo on 5th fret, though.
For the wooden layers: Construct the pattern on paper, transfer it to the wood, then cut with a scalpel from behind.
For the parchment layer: by using a mixture of specialized stencils and gouges of varying radiuses.
Does it add extra visual depth, or [...]
Exactly this! It is also slightly larger than the cherry layer, so ot looks like a black outline. Cherry and Ebony layer are each 1mm deep, so the ebony gives an interesting effect when the rose is viewed slightly from the side.
Die Welt geht unter, und ich muss trotzdem arbeiten. : (
The mechanical parts are a CompactLine 8050 from Sorotec (German manufacturer), Spinogy X22 spindle, and the electronics are custom.
For cutting the rose pattern I used a 15° "RazorPoint" V-carving bit, which worked remarkably well. I have basically zero-radius corners at the bottom.
Here is a bit of a sneak peek, since I have the top already cut to shape (plus 5mm extra which will be trimmed after closing the guitar):

Nothing glued yet, just to get an idea of how it'll look later.


This is a community for sharing artworks. Op made a traditional painting that compares people who willfully listen to AI to goldfishes, essentially calling them stupid. I understand and share your visceral hate for AI, but try to not piss on people who are on your side.