3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
The latest Bambu Studio 2.5.3 now allows the same process. I tried it on a small test cube yesterday. It works well and is easy to use, but it's quite wasteful and slow.
And there are limitations in use. It does not do sloped surfaces well at all. The stair stepping shows too much the individual layers to give you an even color blend. Remember: this technique doesn't actually "blend the colors". But rather it fools your eyes into thinking you see one color instead to different colored layers.
The juice ain't worth the squeeze IMO.
on a toolchanger it probably makes a lot more sense. i've also seen that transparent filaments "bleed" a lot more for a better effect.
I seldom keep transparent filament around, but I believe you. And everything about multicolor is better with a tool changer. :) The only thing I really like my ams for is auto switching spools when the filament runs out.
That said, I'm going back to single filament machine for my next printer. I'm considering getting a Qidi Q2 sometime this summer.
yeah the ams is not a solution for multimaterial prints. there's so much that can go wrong with mixing filaments in the same nozzle. i'm really happy with my snapmaker though, it can do the material switch as well if you mount two spools with the same material. the only thing i'm missing is being able to tell it "switch to this head" if there is no matching spool mounted, and getting it to notice new spools being loaded during a print.