roho

From https://drsforchoice.org/

BREAKING NEWS

Freedom Coalition of Doctors for Choice is pleased to announce a significant win for transparency! United States District Court Judge Matthew J. Kacsmaryk has issued a thoughtful, insightful, and incredible 30-page decision that orders the CDC to release the 7.8 million free text fields from the Covid-19 v-safe program to the public!

The CDC must release hundreds of thousands of these entries each month and all the entries must be released on or before January 15, 2025! CDC had argued that it never had to turn over the entries to the public because it was too burdensome to redact the entries. The Court vehemently disagreed and granted expedited processing, recognizing that “Predictably, the American public now seeks access to COVID-related papers to ensure that relevant government policies were — and still are — supported and justified by the available data.”

The first production of at least 390,000 free text entries is required to be produced by February 15, 2024 and all data received will be posted on this site for the public’s use. The full decision is available here.

---

Court ruling: https://cases.justia.com/federal/district-courts/texas/txndce/2:2023cv00102/378122/40/0.pdf

Excerpts:

MEMORANDUM ORDER AND OPINION

.. The Motion is GRANTED ..

INTRODUCTION

..

V-safe collected two types of data from millions of Americans: (1) check-the-box options and (2) free-text responses.

Plaintiff seeks production of approximately 7.8 million freetext responses pursuant to the Freedom of Information Act (“FOIA”).

..

C. Plaintiff’s FOIA Request

While “Trust the Science” became something of a national slogan, 19 the American public’s trust in science and scientists are at an all-time low.20 It is with this background that Plaintiff aims to further the ideals pledged by the Biden-Harris administration: to “Promote trust, transparency, common purpose, and accountability in our government”21 by making available for public access — and particularly for independent scientific and medical research — all of the relevant health data collected through the V-safe program. As the check-the-box data has already been released, it is the free-text response data Plaintiff seeks.

...

What do you think of this solution?

• channel url: https://www.youtube.com/@DoctorBoz/videos

Can you believe the Church of Satan Leader Anton Lavey Death was a result of a spiritual attack he performed during Halloween?

This testimony is about a Pastor named Dave Bryan who was caring for Anton Lavey’s daughter. Many do not understand we are in a war between the light and darkness.

His decease-date is confirmed: https://en.wikipedia.org/wiki/Anton_LaVeyHi

(me again) i’m trying to use both WIFI-AP, DO and SPI. But my wifi is not properly working when i let everything run at maximum (required) speed.

TLDR; Seems that pins D1 and D2 interfere with WIFI, but why?

i have a NodeMCU ESP8266 V3 ‘wemos’ variant. (it doesn’t have the ESP-12E board integrated) https://makerselectronics.com/product/wemos-nodemcu-v3-esp8266-340g-wifi-module-with-extra-memory-32m-flash

in setup() i have

  WiFi.softAP(ssid, password);

  IPAddress myIP = WiFi.softAPIP();
  Serial.print("AP IP address: ");
  Serial.println(myIP);

  server.on("/", handleRoot);
  server.on("/set_config", handleForm);
  server.onNotFound(handleNotFound);
  server.begin();
  ..
  t=D1;pinMode(t, OUTPUT); digitalWrite(t, LOW);
  t=D2;pinMode(t, OUTPUT); digitalWrite(t, LOW);
  t=D3;pinMode(t, OUTPUT); digitalWrite(t, LOW);

What i'm seeing;

if i have a main loop() with only

• while (Serial.available()){ .. }
• server.handleClient();

Then i can see the AccessPoint and i can connect to it with my Android phone.

When i add code running once every 100 msec

• Debug setting set to MAX debug info to Serial
• using pins D1,D2,D3 for output (to LED screen)
• using D5,D7 for SPI, (to LED screen)
• having SPISettings(15000000, MSBFIRST, SPI_MODE0)
• taking total 60 up to 74 microseconds

Then i do see the WIFI AP, and i CAN connect with the WIFI AccessPoint. (But my LED display is flickering)

When i change the code to running once every 10 msec

• // same as before

Then i CAN connect with the WIFI AccessPoint (But my LED display is flickering)

When i change the code to running once every 10 msec

• Debug setting off
• using pins D1,D2,D3 for output
• using D5,D7 for SPI
• taking total 60 up to 74 microseconds

Then i CAN connect with the WIFI AccessPoint (But my LED display is flickering)

When i change the code to running once every 1 msec

• Debug setting None + Debug to serial
• using pins D1,D2,D3 for output
• using D5,D7 for SPI
• taking total 60 up to 74 microseconds

Then i do see the WIFI AP, but i CAN'T connect with the WIFI AccessPoint (But my LED display is showing a steady picture)

When i change the code to running once every 1 msec

• Debug setting None + Debug disabled
• using pins D1,D2,D3 for output
• NOT using D5,D7 for SPI
• taking total 30 up to 40 microseconds

Then i do NOT see the WIFI AP?!

When i change the code to running once every 1 msec

• Debug setting None + Debug disabled
• NOT using pins D1,D2,D3 for output
• using D5,D7 for SPI
• taking total 50 up to 70 microseconds

Then i CAN connect with the WIFI AccessPoint?!

Seems one of the pins D1,D2,D3 is interfering with WIFI..

instead of using D1,D2,D3, i changed all I/O to only use D1. Then the WIFI AP does not show up in the WIFI networks.

instead of using D1,D2,D3, i changed all I/O to only use D2. Then the WIFI AP does not show up in the WIFI networks.

instead of using D1,D2,D3, i changed all I/O to only use D3. Then the WIFI AP does show up in the WIFI networks. And i can connect to it.

So my question is; Seems that pins D1 and D2 interfere with WIFI, but why?

Text: Djamila le Pair

On Monday, July 3, WikiLeaks founder Julian Assange turned 52.

He 'celebrated' it for the fifth time in the London maximum security prison HPM Belmarsh, where he has been held without conviction since April 2019.

Various actions were organized worldwide, including a photo projection of Assange on London Bridge and other prominent buildings in the British capital.

Earlier, on Friday, June 30, Pope Francis received Assange's wife, Stella, along with her mother, brother, and children.

Assange married Stella on March 23, 2022 in prison. The marriage was officiated by Belmarsh's Catholic chaplain. Pope Francis wrote Assange in March 2021, during the strict corona prison lockdowns, a psychologically particularly difficult time for the prisoner, a letter from which he seems to have drawn great comfort.

That same week, on June 28, 2023, 2,897 Brazilian former ministers, scientists, journalists, and union leaders asked President Lula da Silva to grant Assange political asylum. This follows the request of 99 Brazilian MPs to the US, in April this year, to withdraw the prosecution of the Australian.

While public support for Assange is clearly on the rise internationally, the U.S. seems no plans to let him go free. On the contrary, on June 1, the U.S. reopened. the investigation of Assange in the hope of finding new evidence.

A sign, perhaps, that the U.S. fear that the current evidence will not stand up to possible scrutiny by the European Court of Human Rights.

video source: https://www.ruptly.tv/

Join JP and Tim Ballard as they talk about the work of Operation Underground Railroad and how you can help save children from exploitation. To learn more or give to O.U.R. visit https://ourrescue.org/lp/jp

"Sound of Freedom" will be released July 4th,2023 It is a American action drama film directed and co-written by Alejandro Monteverde. It stars Jim Caviezel, Mira Sorvino, and Bill Camp. Caviezel plays Tim Ballard, a former government agent turned vigilante who embarks on a mission to rescue children from sex traffickers in Colombia. It is produced by Eduardo Verastegui, who also plays a role in the film. The film premiered at the 2022 Coronado Island Film Festival, and will be released on July 4, 2023, by Angel Studios.

Sound of Freedom | Official Trailer | Angel Studios

Some legal education in case cops want to search your car for no reason

The unvaccinated Amish were the control group. Their infection fatality rate from COVID was 90X lower than the surrounding community. Their secret? They ignored ALL the CDC's recommendations. ~ STEVE KIRSCH 29 MAY 2023

I like to inform about the upcoming movie where Jim Caviezel(from 'The passion of the Christ') and his team expose the horrors of this age.

To learn more on the topic, check Anneke Lucas her channel on youtube “real women / real stories”

What do you make of this?