Nephalis

joined 3 years ago
[–] Nephalis@discuss.tchncs.de 2 points 3 months ago

Unfortunatly this is not possible for my setup. I have a Asrock J4050 with its soldered cpu. So I need something like a separate device. USB, SBC with lan, anything like that... Because of that, I was happy when i discovered coral. And to be honest: I did not researched deeply. So I am unaware of its limitation to frigate. I wanted to create my own model and run it on coral. The training was planned to be done on another device.

Now I need to check if a raspi could be sufficent or if anything else comes up.

[–] Nephalis@discuss.tchncs.de 2 points 3 months ago

Do you know whether they plan to introduce a newer TPU instead?

[–] Nephalis@discuss.tchncs.de 23 points 3 months ago (4 children)

Well, good to know. I planned to buy one and attach it to my homeserver ಠ╭╮ಠ

I think this plan needs to be replaced.

[–] Nephalis@discuss.tchncs.de 2 points 5 months ago

Just start with what is available to you. But first sort your aims.

Do you wanna learn or do you want to simply have services available?

[–] Nephalis@discuss.tchncs.de 4 points 5 months ago

Thank you for this clearyfication! I was not able (yet) to understand it that way.

[–] Nephalis@discuss.tchncs.de 8 points 8 months ago (2 children)

Hey something went wrong. Your post appeared 4 times.

[–] Nephalis@discuss.tchncs.de 2 points 8 months ago

Yes, if that is true (and I am not that suprised about it) it is nearly impossible to block them this way.

[–] Nephalis@discuss.tchncs.de 2 points 8 months ago (2 children)

Isn't fail2ban a possibility too? I created a filter for chatgpt and some others, and it feels like its working. My radicale server is my only free acessable service but it comes with a small webgui and so the bots showed up. I have no clue if the bot gets a fraction of your site each time it shows up, but seemingly the ban happens within 300ms when I remember correct. So it wouldn't be that much of information...

When setting the retry to 1 it will ban at the first sight.

[–] Nephalis@discuss.tchncs.de 8 points 9 months ago* (last edited 9 months ago) (2 children)

Well my first reply is: setting up yor own router is like to learn driving with a touring car. You just need to know a lot to set up/handle everything properly. Its just not easy and in m opinion the most wrong point to start.

DNS-wise I would like to recommend something like pihole. To me it was my first thing I installed and used until this day and also the handling of DNS is quite easy. Maybe you should consider lerning other things before setting up your own router.

[–] Nephalis@discuss.tchncs.de 0 points 9 months ago (2 children)

Maybe I underestimate this peofiles, but I got it this way:
These profiles are made to have better matching colours when it cones to different devices. For example, a photo camera, your display and the printer. All of then will show differences for each colour in your taken pictures. A profile is used to minimize those differences so that the print is as close as it could get on your taken or edited picture colorwise.

So I think this is not the tool I am looking for. Moreover, to create my own profile i need a colorimeter to measure the colours my display is showing.

1
Colour Saturation (discuss.tchncs.de)
submitted 9 months ago* (last edited 9 months ago) by Nephalis@discuss.tchncs.de to c/kde@lemmy.kde.social
 

Hey there,

I think its not the first time you read about this.

I recently installed a Linux on my gaming pc and I want to fade out of Windows11 and into Linux only. So far so good.

One of my biggest concerns where the colours of my monitors. Since Adrenaline is not available on Linux, I hoped for another solution to get the colours bright and bangy. But it seems impossible with wayland.
And noo, its not a setting that my monitor can provide. It never was and it never will (I write it down since in every thread about this topic, someone was mentioning it sounds like something the monitor setting should handle).

  • For X11 there was vibrantLinux.
  • A maybe instable solution could be vibrant-cli.
  • For games there is Gamescope thanks to Valve. But this only works for Games started from within Steam.

So this means, my Desktop/Browser still is not as bangy as I want it to be.

My search lead me to KWin scripting could be the solution. This is where I need some advice or somebody to confirm!

If I want to increase the overall colour saturation for my monitors, the correct way to go is to create a KWin script that does it, pack it as a package and use it.

I found the KWin Scripting tutorial over at develop.kde.org and I feel like solving this problem could be interesting.

Since I have no experience with JS, ECMA-Scripting or QMA, all this will be new and I want to know beforehand if I walk the right path. If not, a lot of time will be consumed just to realise I was wrong.

Thanks for reading :)

PS: I like KDE very much

PPS: Just if you never heard of Adrenaline: I have Radeon gpu

[–] Nephalis@discuss.tchncs.de 4 points 9 months ago

Another possibility is, microsoft drops access to kernel level. This would solve all these problems at once. No more cheats on kernel level, no more anticheat on kernel level are needed.

Unfortunately I think Microsoft will avoid doing so, because it would remove one of the last barriers to switch to linux.

[–] Nephalis@discuss.tchncs.de 8 points 9 months ago* (last edited 9 months ago) (2 children)

When you are talking about "popular" games, you mean service games that are often some kind of multiplayer games. Each of them binds a lot of players and is big and popular, indeed. But these are only a few compared to the amount of games that have been released in the past decade. Let alone released games from 2024 that are listed on imdb.com are 1551 Imdb.com

So yes, I can imagine 90% is right since the most games are no service games and do not require some shitty kernel level anti cheat.

For bugs: I have no idea since I only use linux for non-gaming tasks.

 

I don't know what excatly my question is, because of that I would like to explain my concerns and will see what you all think about it.

It seems like the american actions to come are getting more and more unpredictable or just more assaultive. Especialy the tech scene seems willing to ignore inconvenient laws of foreign countries they operate in. While I can adapt to that by simply use other services, there are a few fields no real option is available.

While having Android as an unavoidable OS for mobile devices (at least when one still wants to use payment services like paypal and google pay) my main concern is about Open Source or better saying the place where most projects are stored: Github.

Did MS said something regarding their intentions for github and europe? While Meta, Google, Ebay etc. for example published updated general terms and conditions and clearly communicated they are unhappy with a bunch of things, MS was not that open and did not take postion as far as I know.

How likely it is to become a problem for europe to access github/gitlab/bitbucket you name it and the hosted FOSS and open dource projects lying there?

I am not that deep into the rules of FOSS and open source, so please lighten my up If I missed something essentialy or provide information about initiatives.

Maybe out there poeple are already creating a clone from github to another archive like it is done with other american public domain data stated here? (Sorry in advance, its a german article. TLDR: its about saving the public domain data of america as it is done for ukrainian data too)

1
submitted 2 years ago* (last edited 2 years ago) by Nephalis@discuss.tchncs.de to c/ubuntu@lemmy.ml
 

Hi,

I am still an unexperianced linux user. But I encountered a problem that seems to be unfixable to me as a user.

My laptop is a tuxedo infinityBook pro gen2 with an intel iris xe integrated gpu in its intel i7 11370h.

At the moment it runs on ubuntu 24.04.

My Problem: My 3440x1440 display gets recognized, but its resolution does not work properly. It looks like the resolution is set to the correct size, but the monitor does not recognises it if this makes any sense. It means everything is to big and parts are invisible because they simply leave the panel.

My searches led me to following: It seams like the support for this resolution was patched into the driver only for 22.04 and 23.04. Since I updated the driver as stated on the intel site and nothing changed, I guess I have three options now:

  1. Reinstalling an older version of ubuntu
  2. Wait for a fix by intel
  3. Downgrade to an older version of ubuntu.

Atm option 3 feels like my way to go since I am not the admin of the laptop. Nor i want to wait.

I found tutorials to downgrading but also comments wich said, it is to avoid to downgrade.

Is anybody in here that has ever downgraded ubuntu or fixed my problem somehow?

Thx for reading.

view more: next ›